Hobby-Lobby
SENIOR TELEMASTER LASER CUT KIT
| Tech Specs | Wingspan |
| Length | 63-1/4" |
| Wing area | 1301 sq. in. |
| Flying weight (w/5s 5000mAh) | 10-1/2 pounds |
| Motor | 60 size brushless outrunner |
| Battery | 5 cells 5000mAh LiPo |
| Speed Control | 85A Opto |
| Servos (Ailerons and Flaps) | 4-Standard HS-322 or equiv. |
| Servos (Elevator and Rudder) | 2-HS-225MG |
| Servo (Drop Hatch) | 1-eRC 9g |
| Senior Telemaster Discussion | Click |
Jason Says:, "Simply the best design I've seen! No more hassle to get the wings on and off, amazing. ", The Senior Telemaster Kit includes a drop box: a large hatch on the bottom of the fuselage can be remotely opened by a servo for candy drops or parachute drops. The fuselage interior is large with lots of room for a camera. When the drop door is opened it swings to the rear and is held open by magnets., Kit includes strong aluminum landing gear and bent wire tailwheel assembly, pushrods and clevises. Axels, main wheels and tail wheel not included. You will need 4 rolls of covering. A 6-channel radio system is required to use all functions: Ailerons (2 servos), Flaps (2 servos), Elevator, Rudder (2 HS-225 servos), Drop hatch (eRC 9g servo)., What's New in the Senior Telemaster V2 Kit:, All laser cut precision balsa and plywood, Building Videos:,
Senior Telemaster Kit V2 - Laser cut perfection Completely re-engineered ...HobbyKing
HOBBYKING Y650 SCORPION GLASS FIBER MULTI-ROTOR FRAME 650MM
| Width | 650mm |
| Motor Bolt Holes | 32~40mm |
*Note:, The camera mount shown in last two photos is for reference only and is not included with the Y650 kit. It will be sold separately as an optional accessory., Specs:, Frame Weight:, 410g (w/out electronics), Required:, Multi-Rotor control board, Note:, All Hobbyking Y series frames are purchased factory direct. We have worked closely with the factory engineers to ensure quality. All Y series frames are CNC cut and accurately milled unlike many of the cheap frames available from Ebay or Chinese vendors that are drilled by hand in low tech factories. The Hobbyking Y series also feature thicker GF main plates for added stength.,
The Hobbyking Y650 Scorpion multi-rotor frame is a high quality ...5 Reviews
HobbyKing
HOBBYKING X525 V3 GLASS FIBER QUADCOPTER FRAME 600MM
| Width | 600mm |
| Motor Bolt Holes | 14~30mm |
Specs:, Required:, Multi-Rotor control board, Note:, All Hobbyking X series frames are purchased factory direct. We have worked closely with the factory engineers to ensure quality. All X series frames are CNC cut and accurately milled unlike many of the cheap frames available from Ebay or Chinese vendors that are drilled by hand in low tech factories. The Hobbyking X series also feature thicker GF main plates for added stength.,
The Hobbyking X525 V3 quadcopter frame has arrived! The Hobbyking ...5 Reviews
HobbyKing
HOBBYKING X550 GLASS FIBER QUADCOPTER FRAME 550MM
| Weight | 312g(Frame only) |
| Width | 550mm |
| Motor Bolt Holes | 19mm width |
Specs:, Required:, Multi-Rotor control board, Note:, All Hobbyking X series frames are purchased factory direct. We have worked closely with the factory engineers to ensure quality. All X series frames are CNC cut and accurately milled unlike many of the cheap frames available from Ebay or Chinese vendors that are drilled by hand in low tech factories. The Hobbyking X series also feature thicker GF main plates for added stength.,
The Hobbyking X550 is a high quality folding-arm quadcopter frame ...5 Reviews
HobbyKing
HOBBYKING X666 GLASS FIBER QUADCOPTER FRAME 666MM
| Width | 666mm |
| Motor Bolt Holes | 14~30mm |
| Frame Weight | 415g |
Specs:, Required:, Multi-Rotor control board, Note:, All Hobbyking X series frames are purchased factory direct. We have worked closely with the factory engineers to ensure quality. All X series frames are CNC cut and accurately milled unlike many of the cheap frames available from Ebay or Chinese vendors that are drilled by hand in low tech factories. The Hobbyking X series also feature thicker GF main plates for added stength.,
The Hobbyking X666 quadcopter frame is a high quality glass ...5 Reviews
ReadyMadeRC
IFTRON - STINGER PRO 5.8GHZ 25MW AV TRANSMITTER
Item Description Our new Lower Power Nano 5.8 transmitters conform with the power requirements of many countries that limit the RF power to 25mw. Features include: on-board switching power for ultra-wide input voltage, plus one line-level audio input- all at a very economical price. Want more power and features? Please see our Mondo Stinger 5.8 or Stinger Pro 8.5 transmitters. Comes with whip antenna Audio cable and one of these Plug & Play Power/video Cables (See picture below) If you already have a camera that uses a 3 pin connector, please check the connector picture for wiring compatibility with your camera. If your camera is opposite of ours, please ask for a "REVERSE" cable when ordering or you will have to reverse it yourself. All Iftron Transmitters are Urethane Conformal Coated for moisture protection. Comes with antenna and input cable. Made in USA Lead Free Wiring and Information Here,
Channel 1 5.740GHz Channel 2 5.760 GHz Channel 3 5.780 ...ReadyMadeRC
FY-41AP-A AIRPLANE STABILIZER, AUTOPILOT, AND ON SCREEN DISPLAY
| FY-41AP firmware for fix-wing V1.22 | Download |
| FY module firmware upgrade software and manual | Download |
| The latest FY-DOS&41AP-SETTING software V1.11 for fix-wing | Download |
| FY-41AP manual for fix-wing | Read online |
| More FY-41AP related downloads | Click in |
| FY-41AP OSD display part firmware V1.22a | Download |
| FY module firmware upgrade software and manual | Download |
| Supported servo output | 50Hz refresh frequency |
| Recommended Transmitter | PCM or 2.4GHz with minimum 6 channels |
| FY-41AP Module Working Voltage | 5.3V@0.2A( Powered by Power Manager) |
| Air speed senor | 0 ~ 200KM/h |
| Power Manager | 35g(50×24×18mm) |
| Working Voltage Range | Power of battery 7~26V (2S ~ 6S) |
| Measuring current | 0~100A |
| Power for FY-41AP module | 5.3V@2A |
| Power for Video transmission system | 12V@2A |
| Operating Temperature | -10°C ~ 50°C |
Flight stabilization is achieved via an integrated 3 axis gyro, 3 axis accelerometer, 3 axis magnetometer and a barometric pressure sensor. This enables the module to accurately measure flight attitude, earth azimuth & relative altitude to achieve:, - Extremely stable conventional flight pattern, > Related download for fix-wing :, Reminder from Feiyu-tech: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART1 is the interface connects to the data radio, PC computer serial port to do the firmware upgrade for FY-41AP control module.If you want to upgrade the firmware of FY-41AP OSD module,please, Integrated OSD Video Overlay System, FY-41AP overlays flight telemetry information onto video image. Information displayed includes: Altitude, Speed, Direction, Home Direction and many more., Feiyu tech kindly remind you: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART2 is the interface connects to the PC computer serial port to do the firmware upgrade for FY-41AP OSD module.If you want to upgrade the firmware of flight control part ,please, :, 1, Normal / Traditional fixed-wing planes;, Assistant Software System Require,
Introduction FY-41AP is an inertial attitude measurement instrument used for ...DPCAV
STV5730A OSD (ON-SCREEN DISPLAY) IC
STV5730A Data Sheet:, Click Me!, STV5730A Tech Notes:, Click Me!,
The STV5730A OSD (on-screen display) IC has been out of ...DPCAV
5VDC 5A VOLTAGE REGULATOR (BEC), SWITCH-MODE TYPE
| White | Not installed (N/A) |
| Red | +5VDC Output |
| Black | Ground |
| Specifications | Input |
| Output | 5VDC, 5A maximum |
| Technology | Switch-Mode Regulator |
| Size | 1.5 x 0.8 x 0.5 inch (38x21x13mm) |
| Weight | 9 grams |
| Origin | Made in China by AEO Tech |
The DC input has 2-inch bare leads (Red wire = BAT+). The 5-inch long output cable has a 3-pin servo style connector, wired as follows:, ,
This step-down Voltage Regulator accepts 6-23 VDC on its input ...ReadyMadeRC
ZEISS CINEMIZER HEADTRACKER
| http | //www.inreal-tech.com/ |
HobbyWireless
EASY STAR II - MULTIPLEX
| Construction | Elapor foam on the fuselage, wing and tail section Wings |
| Radio | 3-channel Servos |
| Wingspan | 54" (1370mm) Wing Area |
Details:, Updated and upgraded, the quick-to-build and easy-to-fly EasyStar II is sure to become one of your favorite models. Based on one of the most popular aircraft, the original EasyStar, this improved kit boasts larger internal space, more payload capability and optional ailerons. It is designed to accept a powerful brushless motor which makes it a versatile, durable aircraft sure to impress both the beginner and more advanced pilots. Its gentle gliding characteristics and ease of transport make the EasyStar II effortless hobby fun., FEATURES:, INCLUDES:, Foam fuselage, wings, and tail section, prop, spinner, decals, instruction manual, and hardware, REQUIRES:, SPECS:, COMMENTS:, This model is NOT made from polystyrene foam. For this reason, it is not possible to use white glue or epoxy glue. ,
Hobby-Lobby
MP80G BRUSHLESS ULTRA SPEED TAIL ROTOR SX 4.8V
| Flybarless Gyro Settings - Servo Frequency | 333Hz, Neutral Impulse |
| Size Category | Standard |
| Type | Digital |
| Torque | 48 oz/in @4.8V |
| Length | 1.59 inches |
| Width | .83 inches |
| Height | 1.57 inches |
| Weight | 2.25 oz |
| Motor Type | Brushless |
| Gear Type | Nylon |
| Voltage | 4.8V |
MP80G Brushless Ultra Speed Tail Rotor Sx 4.8V Highlights:, Brushless motor for the highest resolution possible, Tech Notes:, Technical Specifications:, MP80G Brushless Ultra Speed Tail Rotor Sx 4.8V Specs:, Application:, .50 to .90-size heli tail rotor gyro servo, Speed:, .05 sec/60-degrees @4.8V, Dimensions (WxLxH):, .83 x 1.59 x 1.57 in, Connector Type:JR, Deadband:, Zero deadband for ultra precision and performance,
MP80G Brushless Ultra Speed Tail Rotor Sx 4.8V The JR® ...Hobby-Lobby
MONARCH KIT SKILL LEVEL 1 (HAZMAT)
| Tech Specs | Skill Level 1 |
| Length | 22.5 in. (57.1 cm) |
| Diameter | 1.33 in. (34 mm) |
| Estimated Weight | 2.4 oz. (68 g) |
| Recommended Engines | B6-4 (First Flight), C6-5 |
| Projected Max Altitude | 700 ft. (228 m) |
Hobby-Lobby
HYPER BAT
| Tech Specs | Skill Level 2 |
| Length | 21.9 in. (55.6 cm) |
| Diameter | .98 in. (25 mm) |
| Estimated Weight | 1.8 oz. (51 g) |
| High Quality Plastic Nose Cone, Waterslide Decals, Laser cut Fins, Recovery | 12 in. (30.5 cm) Parachute |
| Recommended Engines | B6-0 & B6-6 (First Flight), A8-0 & A8-5, C6-0 & C6-5 or C6-7. Single Stage only |
| Projected Max Altitude | 2125 ft. (648 m) |
Hobby-Lobby
MINI SUPER CUB RTF
Jason Says:, "I used the mini Super Cub to train one of my neighbors last year. The anti-crash tech really does work as advertised.", 31-3/4" wingspan, 21-1/2" long, 7 oz. flying weight. Anyone can have a good time flying the Mini Super Cub RTF. With Anti-Crash Technology, teaching yourself to fly has never been easier. Mini Super Cub comes right out of the box with everything you need included. Its durable Z-Foam construction makes the Mini Super Cub incredibly strong and easy to repair, and its unique trim scheme makes it look great in the sky and in your hands. Features: Anti-Crash Technology, Proportional 3-channel FM transmitter with 1300-foot range, 2 cell 7.4V 300 mAh Li-Po battery with 2 cell DC Li-Po charger and AC adapter, Durable and lightweight Z-Foam constructed fuselage makes repairs easy, Geared and brushed 180 motor allows for fast climbs and exciting maneuvers, One-piece wing with factory-applied decals, Mini Super Cub "Learn to Fly" DVD with assembly instructions., Technical Specifications:, Length:, 21-1/2", Wingspan:, 31-3/4", Flying Weight:, 7 oz., Controls:, Elevator, Rudder, Throttle,
A Mini RTF Super Cub with Anti-Crash Technology